Need help?Do you have a question about the STOWE MARINE DATALINE-X COMPASS and is the answer not in the manual?
General| Brand | STOWE MARINE |
|---|---|
| Model | DATALINE-X COMPASS |
| Category | Compass |
| Language | English |
Explains the Dataline-X System, its single cable design, and NMEA 0183 communication standard.
Details technical specifications for the Dataline-X COMPASS, covering heading functions, general parameters, and additional features.
Provides technical specifications for the Dataline Heading Sensor, including power, size, weight, environmental rating, and NMEA output.
Lists specifications for the Robertson RFC250 Heading Sensor, covering power, size, mounting, resolution, and NMEA data transmitted.
Details the Dataline-X COMPASS display, its dialplate, LCD segments, and the functions of its buttons.
Covers the instrument's startup sequence and the two main operational display modes: Heading and Locked Course.
Instructions for adjusting display backlighting levels and selecting appropriate lighting banks for different areas.
Explains common error messages from the Dataline Heading sensor, their meanings, and recommended actions.
Guide to entering and exiting Demonstration Mode for familiarizing with instrument functions without system connection.
Provides general advice on mounting the instrument and heading sensor, considering location, interference minimization, and mounting surfaces.
Step-by-step instructions for installing the Dataline-X COMPASS display unit, including template use, drilling, and fixing.
Covers mounting procedures for both Dataline and Robertson RFC250 Heading Sensors, detailing orientation and surface requirements.
Details wiring connections for various components and best practices for cable routing and securing to prevent damage.
Covers entering Calibration Mode, performing system calibration, and exiting the calibration process.
Details setting lighting colour, lighting banks, LCD contrast, and the heading reference (Magnetic/True).
Explains entering magnetic variation and performing auto-deviation compensation for Dataline and RFC250 heading sensors.
Guide to entering Test Mode for function checks and Shop Demo Mode for dealer use.
Provides an overview of fault finding, the use of the instrument's Test Mode, and when to contact a dealer for assistance.
Detailed steps to enter and run the instrument's Test Mode for diagnosing display and function issues.
Reference charts to identify probable causes and actions for common display, communication, and sensor faults.
Covers routine cleaning of the instrument head and annual checks of all connections.
Details how to safely remove the instrument and prepare it for return for service, including packing and required documentation.
To Next Page