Need help?Do you have a question about the STRATOS Micra 100 and is the answer not in the manual?
General| Interconnectability | No |
|---|---|
| Hush Feature | Yes |
| Sensor Type | Photoelectric |
| Alarm Sound | 85dB at 3m |
| LED Indicator | Yes |
| Operating Temperature | 0°C to +40°C |
Introduces the Stratos-Micra 100 as a sophisticated High Sensitivity Aspirating Smoke Detection product.
Explains ClassiFire's role in self-configuration and monitoring for optimum sensitivity and nuisance alarms.
Details important safety symbols like static sensitive components and laser class.
Explains the Fire, Fault, and OK indicators and their meanings during operation.
Illustrates and lists the internal components of the detector, including terminal blocks, filter, and fan board.
Details the FAULT/FIRE relay contacts and APIC/SenseNET bus connections.
Guides on connecting the detector to a PC and operating the remote control software.
Describes accessing detector settings via the "Options -> Detector settings" menu for configuration.
Covers setting time/date for logging and configuring Fire, Pre-Alarm, and Aux alarm levels.
Explains alarm delays and the alarm factor for setting detector sensitivity.
Discusses Laser Dust Discrimination (LDD) and the FastLearn process for sensitivity adjustment.
Covers automatic FastLearn initiation upon power-up after power loss or movement.
Explains ClassiFire 3D for rapid fires and Demo mode for testing.
Details setting day/night times and notes remote functions are for future expansion.
Configures alarm/fault latching and cascading alarm behaviour.
Displays device type, firmware version, and run-time hours.
Covers watchdog count, reference detector setup, and reference level/back-off.
Details flow rate display, high limit, and low limit settings for airflow monitoring.
Explains setting the access code and controlling the chart recording rate.
Covers checking separator efficiency and setting a change date for maintenance.
Explains resetting all programmable functions to default values and initiating FastLearn.
Explains how to perform a global or single detector reset using menu options or the reset symbol.
Displays detector function aspects like sensitivity, mean, variance, and alarm levels via histograms.
Explains accessing, saving, and printing chart recordings showing smoke density variation over time.
Describes saving or loading custom sets of programmable function settings to/from disk using .dfs files.
Defines Stratos-Micra 100 for localised incipient fire detection in small rooms and equipment.
Details maximum sampling pipe length and restrictions due to airflow.
Explains the 'Piped Exhaust' Docking Station for sampling from areas with different air pressures.
Advises on simple pipe runs, avoiding 'T' branches, and matching pipe lengths for best results.
Guides on placing sampling points for optimal smoke detection and avoiding airflow interference.
Limits one detector per two AHUs and advises on pipe placement relative to airflow.
Provides guidelines on mounting, exhaust, cabling, and explains docking station functionality.
Details fixing the docking station and seating sampling/exhaust pipes securely.
Guides on connecting power supply cables, including grounding the screen wire to the earth stud.
Explains connecting signal wires (RS485, APIC) to the docking station for SenseNET or Fire Panel systems.
Describes sliding the detector into the docking station and fastening it with screws, ensuring the cover is secure.
Details setting a unique address (1-127) for each detector using the DIP switch SW1.
Provides a table showing address settings for detectors, with binary representations.
Explains linking up to 127 detectors on a SenseNET bus, cable lengths, and differences with Stratos-HSSD 2.
Describes fitting the APIC card and setting loop addresses on APIC DIP switches for Fire Panel communication.
Details connecting a single stand-alone detector to a PC via its 9-way RS232 serial port.
Explains what constitutes an event, storage capacity, and how to view/download the log via remote software.
Allows filtering logged events by category (Alarms, Faults, etc.) for viewing or printing.
Discusses tailoring commissioning to the environment (e.g., clean room vs. flour mill) and testing methodology.
Provides a step-by-step checklist for detector setup, including cabling, address setting, alarm factor, and testing.
Covers external cleaning, checking dust separator efficiency, and replacement procedures.
Explains using the remote software's diagnostic function to check detector operation and identify faults.
Provides checks for nuisance alarms, including ClassiFire factor, Demo mode, and day/night settings.
Lists checks for when alarms fail to trigger, low output, and sensitivity variations.
Guides on troubleshooting low/high flow errors, checking pipe integrity and settings.
Guides on troubleshooting low flow errors, checking for blockages and threshold settings.
Guides on troubleshooting high flow errors, checking pipe integrity and threshold settings.
Lists essential 'DO' points for proper installation, including ClassiFire factor, cable connection, and sampling points.
Lists critical 'DON'T' points, such as forgetting settings, damp locations, and testing with incorrect methods.
Details electrical, environmental, sensitivity, and performance parameters of the detector.
Covers relay ratings, pipe length, service intervals, data bus, IP rating, and safety compliance.
To Next Page
