EasyManua.ls Logo

StreetGlow Gold Series User Manual

StreetGlow Gold Series
3 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
NEON UNDERCAR KIT
INSTALLATION INSTRUCTIONS
Question and Answer IconNeed help?

Do you have a question about the StreetGlow Gold Series and is the answer not in the manual?

StreetGlow Gold Series Specifications

General IconGeneral
ColorGold
Power Source12V DC
Tubes Included4
SeriesGold Series
CategoryAutomobile Accessories
Length4 feet per tube
Warranty1 Year

Summary

Gold Series Undercar Kit Installation Instructions

Kit Contents and Tools Needed

Lists all components included in the kit and tools required for installation.

Testing the Neon Tubes

Details the procedure for testing each neon tube using a power source before permanent mounting.

Installation of Neon Tubes

Guides on mounting the transformer, placing and securing neon tubes, and managing wires.

Wiring Connections

Explains how to connect neon tube leads to the transformer and ensure proper insulation.

Wiring the On/Off Switch

Instructions for mounting and connecting the on/off switch for the neon lighting system.

Wiring Diagram and Notes

Wiring Diagram Overview

Illustrates the electrical connections between the neon tubes, transformer, switch, and power source.

GTO Cable Usage

Explains the importance and proper use of GTO cables for connecting neon tubes.

Technical Tips

SG9500S Transformer Capacity

Details the transformer's ability to power additional tubes and its automatic shutdown feature.

Tube Placement and Suspension Effects

Advises on considering vehicle suspension movement and avoiding interference with vehicle sensors.

Short Circuit Detection

Guides on identifying and resolving short circuits causing flickering or intermittent light operation.

Troubleshooting Guide

Dim or Half-Lit Tubes

Troubleshooting steps for neon tubes that are not fully illuminated.

Neon Tube Not Lighting

Diagnosis for neon tubes that fail to light up, checking for breakage or faulty tubes.

No Lights or Instant Flash

Addresses scenarios where no lights appear or they flash off, checking connections and the transformer.

Faulty Transformer

Guidance on determining if the transformer unit itself is defective.