Description:
STRIDE SlimLine Industrial Unmanaged Ethernet Switch with eight
10/100BaseT RJ45 Ethernet ports. Redundant power inputs with surge
and spike protection. Auto-crossover. DIN rail mounting. Supports
store & forward wire speed switching and full-duplex with flow control.
UL, CSA (CUL), & CE. The -WT models have a metal case and are
rated for a wider temperature range, from -40 ° to 85 °C.
1
w w w . A u t o m a t i o n D i r e c t . c o m
1 - 8 0 0 - 6 3 3 - 0 4 0 5
STRIDE™ INDUSTRIAL UNMANAGED ETHERNET SWITCH
8-PORT – DATA SHEET
3505 HUTCHINSON ROAD
CUMMING, GA 30040-5860, USA
NN
OOTTEE
::
D
IMENSIONS, INSTALLATION AND WIRING INFORMATION IS
SHOWN ON THE BACK OF THIS DATA SHEET.
SE-SW8U
Copper RJ45 Ports: (10/100BaseT)
10/100BaseT ports
Shielded RJ45
Protocols supported
All standard IEEE 802.3
Ethernet compliancy
IEEE 802.3, 802.3u, 802.3x
Auto-crossover
Yes, allows you to use straight-through or crossover wired cables
Auto-sensing operation
Yes, Full and half duplex
Auto-negotiating
Yes, 10BaseT and 100BaseT
Auto-polarity
Yes, on the TD and RD pair
Flow control
Automatic
Ethernet isolation
1500 VRMS 1 minute
Plug and play
Yes
Cable requirements
Twisted pair (Cat. 5 or better) (shielded recommended)
Max. cable distance
100 meters
General Specifications
Ethernet switch type
8 ports
Operating mode
Store and forward wire speed switching, non-blocking
Devices supported
All IEEE 802.3 compliant devices are supported
Standards
IEEE 802.3, 802.3u, 802.3x
MAC addresses
1024 addresses
Memory bandwidth
3.2 Gbps
Latency for
10 Mbps ports
16 us + frame time (typical)
Latency for
100 Mbps ports
5 us + frame time (typical)
Power input
Redundant Input Terminals
Input power
(typical with all ports
active at 100 Mbps)
4.0 W
Input voltage
10-30 VDC (continuous) - Class 2 Power Supply
Reverse power protection
Yes
Transient protection
15,000 watts peak
Spike protection
5,000 watts (10x for 10 uS)
Ethernet isolation
1500 VRMS 1 minute
Operating temperature
range
SE-SW8U
-10 to +60 °C (+14 to +140 °F),
cold startup at -10 °C (+14 °F)
SE-SW8U-WT
-40 to +85 °C (-40 to +185 °F),
cold startup at -40 °C (-40 °F)
Storage temperature
range
-40 to +85 °C (-40 to +185 °F)
Humidity
(non-condensing)
5 to 95% RH
Environmental Air
No corrosive gasses permitted
Vibration, shock & freefall
IEC68-2-6, -27, -32
Agency Approvals
UL/cUL 508, CSA C22 per EN61010-1,
UL/cUL 1604 (Class 1, Div. 2, Groups A, B, C, D),
CSA C 22.2/213 9 per EN50021/EN60079-15
(Zone 2, Category 3), CE (ATEX)
EMI emissions
FCC part 15, ICES-003, EN55022
EMC immunity
IEC61326-1
Hazardous locations
UL1604, CSA C22.2/213 (Class I, Div.2) (file #E200031);
EN50021/EN60079-15 (Zone2)
RoHS and WEEE
RoHS (Pb free) and WEEE compliant
Packaging and protection
SE-SW8U UL94VO Lexan, IP30
SE-SW8U-WT Aluminum IP30
Dimensions (L x W x H)
See mechanical diagrams for details
Weight
SE-SW8U 6 oz (0.17 kg)
SE-SW8U-WT 8 oz (0.23 kg)
Safety Standards:
Electrical Safety
European
Directives
US Emissions
WEEE Compliant RoHS Compliant
RoHS
NN
OOTTEE
::
F
OR ADDITONAL PRODUCT DETAILS, A USER MANUAL,
SE-USER-M, IS AVAILABLE AS A DOWNLAODABLE PDF FILE FROM THE
ONLINE DOCUMENTATION AREA OF THE
AA
UUTTOOMMAATTIIOONN
DD
IIRREECCTT
WEB
SITE.
SE-SW8U-WT
Metal case designed
for -40 ° to 85 °C.
To Next Page
Need help?
General
