Need help?Do you have a question about the Strong Ultra 80 and is the answer not in the manual?
Describes normal startup sequence and indicators for the lamphouse.
Provides initial guidance for diagnosing common operational issues.
Details causes and checks for when the xenon bulb does not ignite.
Addresses issues with ignition and visible bulb flash, often power supply related.
Covers scenarios where ignition ping occurs but no bulb flash is observed.
Diagnoses problems when no high voltage arc is heard during ignition attempt.
Lists reasons and checks for the bulb extinguishing while in use.
Guides troubleshooting when the power supply fails to turn on.
Explains causes of audio noise during bulb ignition, often grounding issues.
Addresses issues causing inconsistent or flickering light output from the bulb.
Provides steps for diagnosing and resolving low light intensity from the bulb.
Discusses issues causing delays or long intervals between ignition attempts.
Addresses problems where the igniter remains active after successful bulb ignition.
To Next Page
General