Need help?Do you have a question about the StrongLite Portable Massage Table Package Olympia and is the answer not in the manual?
Steps to unfold and open the massage table, ensuring cables are untangled for complete opening.
Instructions on safely standing the table upright from its side, ensuring legs are fully extended.
Guide to adjusting the massage table's height by loosening rubber knobs and repositioning legs.
Steps to mount the headrest, including removing the platform and facepillow from storage.
Details the five-year warranty against frame defects and one-year warranty against foam/vinyl defects.
Provides vinyl care instructions, including cleaning and disinfecting procedures, and recommended cleansers.
This document provides a comprehensive guide for the setup, use, and maintenance of a portable massage table. It is designed to assist both new and experienced users in maximizing the functionality and longevity of their Stronglite product.
The Stronglite portable massage table is designed to provide a stable and comfortable surface for massage therapy professionals. Its primary function is to offer a supportive and adjustable platform for clients during various massage treatments. The table's portability allows for easy transportation and setup in different locations, making it suitable for mobile massage therapists, home use, or clinics with limited space. The design emphasizes ease of use, quick assembly, and reliable performance, ensuring a professional and comfortable experience for both the practitioner and the client. The table is engineered to be flat when its cables are completely taut, providing a secure base for clients.
The setup process for the Stronglite portable massage table is straightforward, beginning with the initial unboxing and unfolding. To open the table, it should first be propped upright onto its rubber feet, and both latches must be unlocked. Once unlocked, the table can be opened until a slight resistance is felt from the internal cables. It is crucial to ensure that none of the cables are tangled around the legs during this step, as tangling can prevent the table from opening completely. After verifying the cables are clear, all four legs of the table should be extended to their full length, and the table should be straightened as much as possible to achieve a flat surface.
Standing the table up requires a specific technique to ensure stability and prevent accidental folding. While the table is on its side, the user should grasp both handles. One foot should be placed in front of the edge of a bottom leg to prevent it from sliding or folding during the lifting process. The table is then pulled toward the user, maintaining the leg's position with the foot. Once the table begins to tilt upward, the foot can be released from the leg. After the table is fully upright, it is important to ensure that the tabletop is flat and all legs are fully extended. If the table does not lie flat, a double-check underneath is recommended to confirm that the cables are free and clear from entanglement. It is noted that a slight peak in the tabletop might be observed before a client fully rests on it, due to the design where cables are completely taut.
Height adjustment is a key feature, allowing the table to be customized to the practitioner's ergonomic needs. To adjust the height, the table should be leaned on its side. The rubber knobs on each leg are loosened by turning them counter-clockwise and separating them from the leg and frame. The leg can then be placed at the new desired height location, and the metal thread is re-engaged. Finally, the rubber knobs are returned and tightened onto the metal thread. It is essential to ensure that all legs are adjusted to the same level to maintain stability. The table offers approximately 10 inches of additional height adjustment, though the exact range may vary depending on the specific model.
The facepillow and platform are integral components for client comfort. To mount the headrest, the platform and facepillow are first removed from the elastic straps located under the table bed. The handle on the platform is then released, allowing the dowels to extend outward. Once the dowels are extended, the handle is locked after the platform is set to the desired level. The dowels are then inserted into the wooden table outlet, and the facepillow cushion is placed onto the platform, completing the headrest assembly.
Proper care and maintenance are crucial for preserving the quality and extending the lifespan of the Stronglite portable massage table, particularly its vinyl and structural components.
To protect the vinyl, it is important to keep the table away from extreme cold or heat, as these conditions can cause damage. Storing the table in a vehicle is not recommended due to the potential for intense temperature variations. For optimal preservation, it is advised to transport and store the table in a dedicated carry case. This helps shield the vinyl from environmental stressors and physical damage, maintaining its integrity and appearance over time.
Routine cleaning is essential for hygiene and appearance. Day-to-day dirt and smudges can be effectively removed using a mild soap and warm water solution. For tougher stains and for disinfection purposes, a solution of 100 parts water to 1 part bleach is recommended. To clean, spray a damp cloth with the solution and gently wipe the vinyl. After each cleaning, the vinyl should be gently wiped again with a damp cloth and clean water to remove any residue. Finally, allow the vinyl to air dry completely before using or storing the table.
For more challenging stains, users are advised to contact Stronglite directly for guidance. It is explicitly stated that products like Armor All® or citrus-based cleansers should NOT be used on the table's vinyl. These alternative cleansing methods can cause serious damage to the table, and any such damage would not be covered under the warranty program. Adhering to the suggested cleaning methods ensures the longevity of the vinyl and maintains the table's aesthetic and hygienic standards.
Stronglite offers a comprehensive warranty for its portable tables. The frame material and workmanship are guaranteed for five (5) years from the original date of purchase. Defects in foam and vinyl are covered for one (1) year from the original purchase date. This warranty is valid exclusively for the original purchaser and does not cover damage resulting from misuse, accidents, neglect, or normal wear and tear, which includes tears in the vinyl and damage caused by improper storage or cleaning.
To make a warranty claim, customers must provide proof of purchase to obtain a Return Material Authorization (RMA). The warranty is limited to product repair or replacement at Stronglite's sole discretion. Customers are responsible for return shipping costs. For customers outside the contiguous U.S., all shipping charges (both inbound and outbound) and any applicable duties and taxes are the responsibility of the customer. This warranty policy underscores the importance of proper usage and maintenance to ensure continued product support.
General| Table Length | 73 inches |
|---|---|
| Weight | 34 lbs |
| Frame Material | Hardwood |
| Upholstery Material | Vinyl |
| Carrying Case | Included |
| Padding Thickness | 2.25 in |
| Table Height | 23 - 33 in (adjustable) |
To Next Page