2
Operation Instructions
Height Adjustment:
a. Press the "
" or " " button to adjust the height. The LED display shows the current
height (cm).
Save to Memory:
a. Press "
" or " " button and adjust the device to the desired height.
b. Press and release "M", then immediately select "1", "2", or "3", to save the height to the
corresponding button.
Set Posture Alarm:
The alarm can be used to remind the user to change postures. The suggested time is 45 minutes.
a. Press “A”. The display will read: “ON”.
b. Wait until the display begins to flash “45”. Press the "
" or " " button to adjust the
timer length in minutes
.
c. The timer will begin when the display stops flashing.
d. While the timer is active, changing device height will restart the timer.
e. When the timer is over, a 10-second signal will sound.
f. Press and ho
ld “A” for 3 seconds at any time to turn o the timer. The display will rea
d:
“OFF”.
47.96.60.v3_117014-1
To Next Page
Loading...
