INSTALLATION
1. Contents
Unpack and inspect your Stryker SR-A10 for missing or
damaged Components.
Quantity Description
1 Stryker SR-A10 Antenna
1 Weather Cap
1 Allen Wrench
1 PL-259 Connector
Caution
Small particles on car service or bottom of magnet can damage the
car’s paint surface. Clean surface of car and bottom of magnet with
soft towel or rag before installing on a vehicle.
When removing the antenna, grasp the coil portion of the mouth
firmly and tilt the antenna towards you. This will break the
magnetic force and allow you to lift the antenna off of vehicle
without scratching the paint. Do not slide twist magnetic mount
while on vehicle.
To Next Page
Loading...