Strymon blueSky - Knobs and Switches; Front Panel Controls: VERB, DECAY, LOW, PRE-DELAY, FAV

REAR PANEL CONNECTIONS
USB-C
Computer connection for
controlling via MIDI and firmware
updates.
9VDC
Use the included power supply
or an adapter with the following
rating: 9VDC, centernegative,
300mA minimum.
AUDIO INPUT SELECTOR
MONO: Use with a mono input signal.
Output is stereo.
STEREO: Use with a stereo input
signal. Output is stereo.
IN
High impedance, ultra low-noise,
discrete Class A JFET preamp input.
TRS adapter cable required for stereo
input signal.
OUTPUTS
Low impedance stereo audio signal
outputs. Use OUT L for mono output.
EXP / MIDI
Multifunction communication jack for external control of blueSky’s features
and functions. Use a standard TRS expression pedal for continuous control
over the knobs of the pedal (default setting). See complete User Manual for
details about configuring for MIDI communication or accessories such as
Strymon Conduit, MultiSwitch Plus, and MiniSwitch.
>> Download the complete User Manual at strymon.net/support/bluesky-v2/ <<