Strymon Mobius - Mod Machines: Phaser; Phaser Parameters; Phaser Modes Explained

Mobius - User Manual
®
pg 16
Mod Machines: Phaser
TYPE
push (bank/BPM)
hold (save)
push (param)
hold (global)
VALUE
PARAM 1 PARAM 2
B TAPA
SPEED
DEPTH LEVEL
BANK DOWN BANK UP
FILTER
DESTROYER
VIBE
ROTARY
FLANGER
PHASER
CHORUS
FORMANT
AUTOSWELL
VINTAGE TREM
PATTERN TREM
QUADRATURE
®
From the thick and chewy 2, 4 and 6 stage modes, to the rich and swirly
8, 12 and 16 stage modes, the PHASER machine offers a full palette
of traditional and innovative phaser sounds. For added fun, a unique
BARBER mode is added, derived from the frequency shifters developed
in the 1970’s.
PARAMETERS:
MODE:
Selects the current phaser algorithm.
2 Stage
4 Stage
6 Stage
8 Stage
12 Stage
16 Stage
Barber Pole
|||||||||||
REGEN: Adjusts the amount of feedback signal. Adjust high for
more extreme phaser sounds.
Sine
Square
Ramp
Tri
Saw
WAVESHAPE:
Selects the current LFO (low frequency oscillator)
waveform to apply to the phase stages.
|||||||||
HEADROOM:
Adjusts the amount of distortion within the phaser
circuitry. Set to maximum for the cleanest phaser
tones, and dial back to add the feel and grit of dirtier
phase tones.
Continued on Next Page