Mobius - User Manual
®
pg 29
TIPS & TRICKS: The DEPTH knob sets the amount of modulation of
the shift frequency. With the DEPTH at minimum, the shift frequency
is unaltered and set by the SHIFT param. Turning up the DEPTH
will modulate the shift frequency. This is most easily understood
when heard with large SHIFT param settings, but will create many
interesting sounds with lower shift settings.
When the DEPTH knob is set to maximum, the shift frequency will
approach 0 during the LFO cycle. Try using a SQR LFO waveshape
with a high SHIFT value and the DEPTH knob at maximum. One
half of the square wave will sound like input signal (when the shift
frequency is 0) and the other half will sound like the effect at the
shift frequency set by the SHIFT param.
Mod Machines: Quadrature Continued
To Next Page
Loading...
