interfere with, or be affected by, other equipment with
similar qualifications. We cannot be sure that other
equipment used in its vicinity will meet these standards
and so we cannot guarantee that interference will not
occur in practice. Where there is a possibility that injury,
damage or loss might occur if equipment malfunctions
due to radio frequency interference, or for general
EU Declaration of Conformity
Product Laboratory Equipment
Manufacturer Cole-Parmer Ltd
Beacon Road
Stone, Staffordshire
ST15 0SA
United Kingdom
File Number P225
Authorised Cole-Parmer
Representative Beacon Road
Stone, Staffordshire
ST15 0SA
United Kingdom
Shaker Incubator
(reference the attached list of catalogue numbers)
This declaration of conformity is issued under the sole responsibility of the manufacturer
Additional Information
Place of Issue
Date of Issue
Authorised Representative
Title
Signature
Signed for and on behalf of the above manufacturer
Year of CE Marking: 2013
Stone, Staffordshire, UK
29 April 2013. Revised 09 March 2017
Steve Marriott
Technical Director
IEC/EN 61010-1:2010
Safety requirements for electrical equipment for
measurement, control and laboratory use.
Part 1: General requirements.
Particular requirements for laboratory equipment for
mixing and stirring.
Electrical equipment for measurement, control and
laboratory use. EMC requirements.
Part 1: General requirements (Class A).
IEC/EN 61010-2-051:2015
IEC/EN 61326-1:2006
Particular requirements for laboratory equipment for the
heating of materials.
IEC/EN 61010-2-010:2003
Object of Declaration
The object of the declaration described above is in conformity with the relevant Union Harmonisation Legislation:
References to the relevant harmonised standards used or references to the other technical specications in relation
to which conformity is declared:
Low Voltage Directive
EMC Directive
RoHS Directive
2014/35/EU
2004/108/EC
2011/65/EC
(until 19 April 2016)
2006/95/EC
(from 20 April 2016)
To Next Page
Loading...