The 2 double effects processors allow to assign 2 separate effects to the Lower and Upper sections,
for a total of 4 different effects at once. As an example, the FX1 can be set to Drive for the Upper
section and, at the same time, to Chorus for the Lower section. Using the Upper/Lower button, you
can toggle between the related parts and show or select the effect for that part. In addition, you will
see or change the associated FX using the 2 main LOWER and UPPER buttons below the display.
You can visualize the Sound and FX structure and signal flow as it follows:
Upper > FX1 (one of the four) > FX2 (one of the four) > Reverb (programmable send in Edit)
Lower > FX1 (one of the four) > FX2 (one of the four) > Reverb (programmable send in Edit)
Amount: the 2 potentiometers control the Amount of the selected effect, like the dry/wet ratio (for
modulating effects like the Chorus) or other parameters, like the distortion level of the DRIVE
A post processing effects which enhanced the stereo width image and smoothly compress the
To enter the GLOBAL edit, keep pressed the EDIT button for a few seconds; you will find various
pages (shown on the top right area of the display) with functions that will affect the instrument,
regardless what Program is selected. To escape from the function, press again the EDIT button and
all settings will be memorized automatically.
When the focus (cursor) is on the top area of the display, rotating the encoder you can select the
various pages; clicking on the cursor, the focus will be moved on the parameter and rotating the
encoder you can change the related value.
The GLOBAL EDIT main functions are:
User manual - Numa Compact X SE https://www.studiologic-music.com/support/articles/ncxse_manual/?l...
16 di 32 01/03/2024, 13:41
To Next Page
Loading...
