To Next PageTo Next Page
Need help?Do you have a question about the Stulz Cosmotec CVE Series and is the answer not in the manual?
General| Brand | Stulz |
|---|---|
| Model | Cosmotec CVE Series |
| Category | Air Conditioner |
| Language | English |
Explains symbols used in the manual for warnings and information.
Instructions for notifying STULZ SpA about new ownership.
Critical safety precautions and intended use of the air conditioners.
Guidelines for safe handling and environmental protection during use.
Procedures for unpacking the unit and performing initial checks.
How to identify the unit using its identification plate.
Details the physical structure and main functional components of the unit.
Describes key refrigeration parts like compressor, condenser, evaporator, and valves.
Lists and describes various control and safety devices like boards, thermostats, and contactors.
Explains mechanical and electronic thermostat settings and operation.
Details the unit's display interface, keypad functions, and LED indicators.
Explains the meaning of LED indicators and keypad combinations for operation.
Describes unit states (ON/OFF, STAND-BY) and the basic working logic for cooling and heating.
Details the logic for evaporator fan control and Smart Energy Management modes.
Explains condenser fan control, sequencing function for multiple units, and Modbus communication.
Describes accessing the user menu, changing parameters, and setting up SEM functions.
Lists various alarm conditions and how they are indicated on the display and outputs.
Details specific alarms like probe faults, high intake temperature, and signal types.
Outlines the steps to enter and perform a unit check procedure.
Provides general guidelines and considerations for unit installation.
Provides general installation advice, placement considerations, and warnings.
Details the specific steps for external and semi-flush mounting of the unit.
Covers condensate drainage and the requirements for electrical connections.
Emphasizes safety checks for voltage, phase, and grounding before electrical connections.
Instructions for installing and cleaning the air filter for CVE and CVO units.
Details how to connect the display unit and set up sequencing between two units.
Instructions for connecting Modbus communication and a remote probe.
Covers pre-start-up checks, safety warnings, and initial operational steps after start-up.
Outlines checks after initial start-up and the procedure for shutting down the unit.
Details the recommended schedule for routine maintenance tasks.
Covers cleaning procedures for the heat exchanger and considerations for downtime.
Information on potential risks, emergency situations, and general safety standards.
Comprehensive safety standards related to electrical equipment and maintenance.
Hazards from fan movement and contact with unit components like heat exchanger fins.
Information on fire hazards and the properties of the refrigerant used.
Identifies risks associated with unit movement, anchoring, and support.
Instructions for safe demolition and disposal of the unit and its components.
Addresses issues related to excessive condensate formation and inadequate cooling.
Covers common issues like dirty condensers, fan failures, and compressor problems.
Lists available options like special colors, stainless steel casings, and protective treatments.
Describes accessories such as filters, air baffles, mounting frames, and keypads.
Provides specific notes and points for applying the sealing gasket correctly.
