2
STÛV 16-IN
THIN EDGE FRAME
9310400021
PICTURE-TYPE FRAME
9310400020
AIR DAMPER
9310400019
This manual explains how to carry out a standard installation of a Stûv 16-cube
and 16-H unit. To install a frame or the air damper, certain particularities, which are
outlined in the additional manuals provided, must be followed as applicable. If the
appendices are missing, contact our customer service department and request
the manual(s) needed, mentioning the code under the icon(s) below.
Look for these symbols. They signal a change from the standard installation. It is
very important to look through the installation manual and the additional manuals
before getting started and to follow the instructions closely during installation to
ensure that no steps are omitted.
Keep all instruction manuals provided close at hand to have all the information
needed and to ensure proper and safe installation.
IMPORTANT
Before installing this Stûv unit, contact the local authorities and/or your
insurance company to obtain a building permit and inquire about all the
requirements that need to be met.
For information on all the applicable regulatory requirements, contact your
local fire department before starting the installation.
!
THANK YOU! APPENDICES
Thank you for choosing a Stûv wood-burning insert! It has been designed
to provide maximum pleasure, comfort and safety. The utmost care has
been taken in manufacturing this product. If, despite this, you still find a flaw,
please contact your dealer.
To Next Page
Loading...
