3
Starting up TCG
1. Supply the TCG with power:
a. Set the power supply to 12 V
b. Connect the TCG to the breakout cables
c. Connect the breakout cables to the cable harness adapter
d. Connect the power supply unit to the cable harness adapter
e. ATTENTION: Select the correct power supply output connectors
f. ATTENTION: Check the polarity of the power supply output connectors
2. Switch on the cable harness adapter
3. Wait for the status LED of the TCG
ATTENTION: For (optimal) GPS and GSM reception, the TCG must be posi-
tioned outside buildings
To Next Page
Loading...