StyleWell BD8044B - Installing Center Legs; Final Tightening

7
Assembly (continued)
5
Attaching the center legs
Attach the adjustable leveler(GG) to the center legs(G,H and I)
Attach the center legs(G,H or I) to the slats (E) with bolts (BB)
through part(HH). attach washer(CC) and nuts(DD),
Tighten with open spanner(EE) and allen key (FF)
Determine the correct center leg height depending on side rail
placement-low position, middle position, or high position.
6
Tightening the bolts
Fully tighten all bolts previously installed with Allen Wrench.
Please use hand tools to assemble this product. Do not use power tools.
Tighten all the bolts only on a level surface.
G
H
I
GG
BB
HH
CC
DD
I
G
G
G
G
G
G
NOTE: Do not over tighten screws and bolts to avoid
stripping.