What to do if Su-Kam Colossal has no output power?
If your Su-Kam Inverter isn't providing output power, there are several potential causes: * **Low Battery:** Check the condition of the batteries and recharge them if necessary. * **Loose or Corroded Battery Connections:** Inspect all battery connections, cleaning them to ensure a solid connection. * **Loose AC Output Connection:** Verify that all AC output connections are secure.
What to do if Su-Kam Colossal trips frequently at backup?
If your Su-Kam Inverter is tripping frequently during backup mode, reduce the load and restart the Inverter using the Power Active Switch.
What to do if Su-Kam Colossal Inverter shows mains MCB Trip on its display panel?
If your Su-Kam Inverter displays 'mains MCB Trip,' reduce the load connected to the inverter. Then, reset the mains MCB located on the rear side of the Inverter.
Why Su-Kam Inverter does not operate during backup mode?
Your Su-Kam Inverter might not operate during backup mode due to: * **Low Battery:** If the low battery graphic symbol is illuminated, switch OFF the Inverter using the power active switch and allow the battery to charge when the mains is resumed before running the Inverter on battery again. * **Overload/Short Circuit:** If the overload/short circuit graphic symbol is glowing, reduce the load and reset the Inverter using the Power Active switch.
What to do if Su-Kam Colossal Inverter system shuts down after 20 sec no display at all?
If your Su-Kam inverter system shuts down after 20 seconds with no display, check the AC input and output wiring to ensure it's properly connected. The issue may be that the output of the Inverter is wired back to its own input.
Safety guidelines for using the inverter, avoiding liquids, proper handling, and electrical safety.
Safety measures when working with batteries, including personal protection and handling precautions.
Overview of the inverter's front panel, including the ON/OFF switch and LCD display.
Description of the inverter's back panel connections and components like MCBs and terminal blocks.
Explanation of the five-stage ATM pulse charging process for batteries.
Features the ATM with Pulse charger for efficient battery charging and maintenance.
Inverter's self-resetting capability for overload, short circuit, and low battery faults.
Details the inverter's protective features against voltage and short circuit conditions.
System automatically shuts off to prevent battery damage from over-discharging.
Charger adjusts to float mode when battery voltage exceeds limits, resuming automatically.
Inverter shuts down automatically when load demands exceed capacity.
Inverter configures charging for optimal battery performance and lifespan.
Limits charging current to prevent battery overheating and ensure optimal charging.
Specifies the ideal environmental conditions for inverter installation.
Guidelines for selecting the optimal placement for the inverter near batteries.
Detailed instructions for connecting the DC cables to the inverter.
Procedures for connecting the AC input and output wiring to the inverter.
Importance of separating AC and DC wiring for safety and performance.
Description of automotive starting batteries and why they are not suitable for inverters.
Explanation of deep cycle batteries, their suitability for inverters, and maintenance.
Recommendations for battery location and enclosure for optimal performance and life.
Definition of electrolyte as a mixture of water and sulfuric acid.
Description of battery plates made of lead and their function.
Explanation of sulphating, its cause, and effect on battery capacity.
Description of electrolyte stratification and its corrosive effect.
Definition of deep discharge and its impact on battery life.
To Next Page
General