Suaoki D80 - Measurement Modes; Single Distance Measurement

· 4 ·
Equipment Operation
Power on and off
Long press button to power on the equipment.
Long press button to switch off the equipment.
The laser will be switched off automatically after 30 seconds,the
equipment will power off after 3 minutes of inactivity.
Measurement Reference Point
Press button to change the reference point(front & rear)
Measurement
Single Distance Measurement
Press to activate the laser. Press again to trigger the
distance measurement. The result will be displayed on the screen
immediately.
Unit Conversion
Long press button to switch the unit.
EN