Integrated Use & Care 18
Cleaning
INTERIOR CLEANING
It is necessary to keep your integrated unit clean to ensure
smooth operation and keep food safe. Wipe up any spills
immediately.
To clean interior surfaces and removable parts, wash with
a mild solution of soap and lukewarm water with a little
baking soda. Do not use vinegar or alcohol-based
cleaners. Rinse and dry thoroughly. Avoid getting water on
the lights and control panel. Do not use abrasive cleaners,
as these may scratch interior surfaces.
Do not use hot water to clean glass shelves until they
have come to room temperature. Extreme temperature
may cause the glass to break.
Do not use a metallic or highly abrasive cleaner or
cloth, as this will scratch the stainless steel finish.
STAINLESS STEEL EXTERIOR
To clean the exterior of a stainless steel model, use a soft,
nonabrasive stainless steel cleaner like Signature polish
and apply with a soft lint-free cloth.
Signature polish is available from Signature Limited
Laboratory, P. O. Box 13436, Dayton, Ohio 45413, or call
877-376-5474.
To bring out the natural luster of the stainless steel, lightly
wipe the surface with a water-dampened microfiber cloth
followed by a dry polishing chamois. All work should
follow the grain direction of the finish. Better results are
obtained by keeping the cloth in continuous contact with
the stainless steel.
To Next Page
Loading...
Need help?
General
