Sub-Zero ICBBI-36F User Manual

Built-In Refrigeration 9
subzero.com/specs
Stainless Flush Inset Application
It is necessary to consider the following points when
planning for a  ush inset application:
• The  ush inset depth is 56 mm deeper than the
standard opening depth.
• The  ush inset width is 46 mm wider than the
standard opening width.
• The  ush inset height is 22 mm higher than the
standard opening height.
• You must allow a 15 mm reveal around the perimeter
of the unit and grille to allow for proper door swing and
air ow.
IMPORTANT NOTE: The  ush inset application is not a
separate model. The same model is used in a standard or
 ush inset application of stainless steel fridge.
STANDARD INSTALLATION
620 mm
minimum
OPENING
DEPTH
675 mm
minimum
FLUSH
INSET
DEPTH
56 mm
32 mm
TOP VIEW
TOP VIEW
FLUSH INSET INSTALLATION
WITH
19 mm PANEL
620 mm
minimum
OPENING
DEPTH
Standard installation. Flush inset installation.
STANDARD INSTALLATION
620 mm
minimum
OPENING
DEPTH
675 mm
minimum
FLUSH
INSET
DEPTH
56 mm
23 mm
TOP VIEW
TOP VIEW
STAINLESS STEEL
FLUSH INSET INSTALLATION
620 mm
minimum
OPENING
DEPTH

Sub-Zero ICBBI-36F Specifications

General

Brand	Sub-Zero
Model	ICBBI-36F
Category	Refrigerator
Language	English