The SZ-CR2 is a Two-Compressor Controller with separate Set Points for each
Compressor. They are specifically designed for Refrigeration applications wherein the
Compressor cuts off at Set Point and is restarted at a Temperature of Set Point plus
Differential. Amongst other features, an important one is that in case one Compressor
is not capable of handling the load, the second Compressor will activate and both
Compressors will cutout at the lowest Set Point.
Features:
• The operation is very user friendly and is easily understood with the examples in the
instructions below.
• Various parameters help set up the instrument functions for different applications.
• The SZ-CR2 can be used for applications with a measuring range from -45.0⁰C to
70.0⁰C.
• Defrost Application
• Cycling of Compressors so that there is no overload on one Compressor.
To Next Page
Loading...