Legacy U.S.A..(ENG.)A2280BE–A
6
Interior equipment
6-15
– CONTINUED –
B Using the cover
HB7015BA
To extend the cover, pull the end of the cover out of the housing, then
insert its hooks into the catches as shown. To rewind it, unhook it from
the catches and it will rewind automatically. You should hold on to the
cover and guide it back into the cover housing while it is rewinding.
B To remove the cover
HB7017BAHB7016BA
1. Rewind the cover.
2. To take it off the cover rails, lift it out while pressing the release
knobs located both sides of the cover housing.
3. Store the cover in the cargo area.
To install the cover:
Hang the both ends of the cover housing on the cover rails. Make
sure that the cover is mounted securely by pulling it up.
To Next Page
Loading...
