1
2
3
To start the Navigation System, start the engine. The
opening screen will appear, followed by the CAUTION
screen. Read the instructions on the screen and press
MENU
. The current map screen will appear. To select
a language, press
MENU
on the screen, followed by
LANGUAGE SELECTION
and then select English
or French by touching the screen.
To nd a point of interest (POI) press DEST on the
navigation face plate.
Make sure you are in the desired search area, and
then touch
POINT OF INTEREST
to select.
4
5
6
7
Enter the POI name by using the letter keys on the
screen and then touch
LIST
.
Use
to scroll up or down for the POI name.
The screen will display suggested routes.
Select the route preference you want to take, and
then touch
.
The system searches the route and displays it on
the screen. Once completed, touch
START
and
begin driving.
You can also find addresses by using the point of interest (POI) function. You can use this in the event
you do not have a specific address but can refer to a specific shopping mall, airport, museum, etc.
To Next Page
Loading...
