ABS-3
ABS (DIAGNOSTICS)
BASIC DIAGNOSTIC PROCEDURE
5 PERFORM THE DIAGNOSIS.
1)Inspect using “Diagnostics Chart with Diag-
nostic Connector”.<Ref. to ABS-28, Diagnos-
tics Chart with Diagnosis Connector.>
NOTE:
For trouble code list, refer to “List of Diagnostics
Trouble Code”.<Ref. to ABS-24, WITHOUT
SUBARU SELECT MONITOR, LIST, List of Di-
agnostics Trouble Code.>
2)Repair trouble cause.
3)Perform the clear memory mode. <Ref. to
ABS-22, WITHOUT SUBARU SELECT MONI-
TOR, OPERATION, Clear Memory Mode.>
4)Perform the inspection mode. <Ref. to ABS-
21, Inspection Mode.>
5)Calling up the trouble code. <Ref. to ABS-20,
Read Diagnostic Trouble Code.>
Is only the start code issued? Complete the
diagnosis.
Inspect using
“Diagnostics Chart
with Diagnostic
Connector”. <Ref.
to ABS-28, Diag-
nostics Chart with
Diagnosis Con-
nector.>
Step Check Yes No
To Next Page
Loading...
