ABS-5
ABS (DIAGNOSTICS)
BASIC DIAGNOSTIC PROCEDURE
4 PERFORM THE DIAGNOSIS.
1)Inspect using “Diagnostics Chart with
Subaru Select Monitor”.<Ref. to ABS-96, Diag-
nostics Chart with Subaru Select Monitor.>
NOTE:
For trouble code list, refer to “List of Diagnostics
Trouble Code”.<Ref. to ABS-24, WITHOUT
SUBARU SELECT MONITOR, LIST, List of Di-
agnostics Trouble Code.>
2)Repair trouble cause.
3)Perform the clear memory mode. <Ref. to
ABS-19, CLEAR MEMORY MODE, OPERA-
TION, Subaru Select Monitor.>
4)Perform the inspection mode. <Ref. to ABS-
21, Inspection Mode.>
5)Calling up the trouble code. <Ref. to ABS-18,
READ DIAGNOSTIC TROUBLE CODE,
OPERATION, Subaru Select Monitor.>
Is no trouble code designated
and does ABS warning light go
out after turning on?
Complete the
diagnosis.
Inspect using
“Diagnostics Chart
with Subaru Select
Monitor”. <Ref. to
ABS-96, Diagnos-
tics Chart with
Subaru Select
Monitor.>
Step Check Yes No