Control System
SELECT LEVER
CS-3
2. Select Lever
! The automatic transmission’s select lever moves through seven positions.
! The select lever makes shift direction (longitudinal) movements as well as select direction (lat-
eral) movements. The select lever is guided by a gate to make these movements.
! To transmit movements of the select lever to the transmission, a push-pull cable is used.
! The detent spring is a new addition to the select lever mechanism. It ensures more precise po-
sitioning of the select lever.
! A plastic select lever base plate is used.
(1) Push-pull cable (5) Gate
(2) Detent spring (6) Select lever
(3) Base plate (7) Arm
(4) Detent arm
B3H1501A
To Next Page
Loading...
