VDC-88
VDC (DIAGNOSTICS)
DIAGNOSTICS CHART WITH DIAGNOSIS CONNECTOR
6 CHECK BATTERY SHORT OF HARNESS.
1) Turn ignition switch to ON.
2) Measure voltage between VDCCM and
chassis ground.
Connector & terminal
(F87) No. 63 (+) — Chassis ground (
−
−−
−
)
(Lateral G sensor):
(F87) No. 78 (+) — Chassis ground (
−
−−
−
)
(Pressure sensor):
Is the measured value less than the speci-
fied value?
0.5 V Replace faulty
sensor.
Repair or replace
harness connec-
tor between
VDCCM and faulty
sensor.
Step Value Yes No
To Next Page