Subaru Legacy 2010 - Lead Vehicle Start Alert

134
Vehicle Dynamics and Driver Assist Systems
May 2017
Lead Vehicle Start Alert
Lead Vehicle Start Alert functions when the EyeSight
®
vehicle remains stopped while the
vehicle in front has started to move forward approximately 10 ft (3 m) or more. The driver is
alerted by means of a two-tone audible beep and flashing lead vehicle indicator on the multi
information display. This function only activates when the select lever is in the Drive, Manual, or
Reverse gear position.
Two-tone beep
Lead
vehicle
10 ft (3 m)
or more
Lead
vehicle
Lead Vehicle Start Alert
Lead Vehicle Start Alert can be turned ON and OFF using the driver’s customizing functions or
steering wheel mounted switches.
SET
Enter
1/7
Select
Select
SET
Change settings
Settings screen
i/SET Switch
Pull and hold
For Menu
Settings
Screen Settings
ItemDispla
yS
etting Default setting
Warning volume Max/Mid/MinMid
Lead vehicle acquisition aler
tA
ctivateActivate/Deactivate
Lead Vehicle Start Alert
ActivateActivate/Deactivate
S00829
S00867
Lead Vehicle Start Alert – Customization 1 Lead Vehicle Start Alert – Customization 2
4-57
4-594-58