13
June 2014
2015 Legacy and Outback New Technology Training (Module 926)
Radiator or Condenser Removal
Note: Radiator or condenser removal requires bumper cover removal.
After bumper cover removal, remove the four clips along the top and the two clips that face forward
that secure the grille bracket to the vehicle and remove the grille bracket.
Grille Bracket Clips Under Grille Bracket
Remove the left and right upper radiator brackets, and two upper radiator to condenser bolts.
Upper Radiator Bracket Condenser To Radiator Bracket
Next remove the bolts that secure the “condenser to radiator bracket”.
1-15
1-16
1-17 1-18
To Next Page
Loading...
