67
June 2014
2015 Legacy and Outback New Technology Training (Module 926)
Rear Gate will not open
Open Access Panel with Gate Closed Top of Gate Lift Arm Gate Closed
If the PRG will not open from a mechanical condition, remove the power supply as previously
described and enter the rear of the vehicle from the back seat. Remove the lift arm at the gate
and open the gate from the emergency release. Exit the vehicle from the rear.
Emergency Release
Note: Access to the emergency release is gained by removing the cover panel and
pushing on the indicated lever towards the driver side of the vehicle.
3-33
3-34
3-35
To Next Page
Loading...
