20
Displaying Vehicle Information and Programming Vehicle System Functions
3
Select the history frame (data storage location) in which the data are to
be retained.
4
will appear, requesting you to confirm your selection. Select it if
the selection is correct.
5
Select .
This completes the procedure.
NOTE
•A maximum of three different driving record data sets can be retained for each of the trip meters (TRIP A and TRIP B).
• When the data storage location (history frame) specified in Step 3 is already occupied by data, this data will be replaced with new data
once you have confirmed Step 4.
• When the driving record data has been successfully retained in a history frame, the history frame’s heading will change from a number
to the date of the data retention.
• Data retention is cancelled if you select in the “Select data “ box.
To Next Page
Loading...
