Suburban SF-30 Installation Instructions

TO CLEAN THE CHAMBER, THE FURNACE MUST BE REMOVED FROM THE CABINET
AND THE MANIFOLD. BLOWER ASSEMBLY AND CONTROLS REMOVED LEAVING
THE CHAMBER ONLY, AS SHOWN. USING COMPRESSED AIR, BLOW THROUGH THE
CHAMBER, AS SHOWN BY ARROWS, TO REMOVE SOOT OR LOOSE DEBRIS.
Figure 7
Figure 6
9

Suburban SF-30 Specifications

General

Ignition Type	Direct Spark Ignition
Voltage	12 VDC
Efficiency	80%
BTU Output	30, 000 BTU
Type	Forced Air
Vent Type	Direct Vent