8
BLUETOOTH/ TWS OPERATION
BLUETOOTH
Press the button and the led flashes blue to indicate the unit is in
Bluetooth pairing mode. Connect your Bluetooth enabled device
as per its operating instructions. Once connected the LED will stay
illuminated blue.
TWS (TRUE WIRELESS STEREO)
Hold the button for 2 seconds on the main unit and the led flashes
blue to indicate it is looking for a second unit to pair with. On the
second unit also hold the Bluetooth/TWS button until it flashes blue.
After a few seconds the units will pair automatically and both pair led
will stay illuminated.
Note: If you wish to use the TWS function and Bluetooth at the
same time connect the two units via TWS first and then connect your
Bluetooth device to the main unit as normal.
To Next Page
Loading...
