Sukhoi SU-34 Fullback User Manual

Guidance for experienced modelers before starting the assembly process of the Su-34.

Lists all components included in the receiver-ready version of the Su-34 model kit.

General safety guidelines and operational recommendations for flying the Su-34 model.

Important statements regarding the model's operation, responsibilities, and age recommendations.

Precautions for safely charging and using Li-Poly batteries with the Su-34 model.

Specific warnings and guidelines for handling, charging, and using the model's batteries safely.

Instructions on how to properly mix and use epoxy for model assembly.

Checking vectored thrust nozzles movement with elevator control inputs.

Detailed setup for elevator, aileron, and rudder mixing with vectored thrust nozzles.

Verifying vectored thrust nozzle movement in unison with elevator control.

Checking vectored thrust nozzle movement in unison with aileron control.

Verifying vectored thrust nozzle movement in unison with rudder control.

Using extension wires to reduce channels for vector control with a 5CH radio.

Procedure to re-calibrate the throttle for safe ESC/motor startup.

Describes the flight performance of the Su-34 with and without thrust vectoring.

Guidance on landing techniques for runways and taller grass.

Product details for the main wing set, available in green and blue.

Product details for the tail wing set, available in green and blue.

Product details for the fuselage, available in green and blue.

Product details for the canopy, available in green and blue.

Product number for the vector propelling nozzle set.

Product details for the guided missiles set, available in green and blue.

Product number for the 64MM ducted fans.

Product number for the automatic landing gear set.

Product number for the AB glue.

Product number for the Su-34 water-sticker set.

Product number for the brushless power system.

Product number for the 3500KV outrunner brushless motor.

Product number for the 40A ESC.