TABLE OF CONTENTS
SECTION 3—SPECIFICATIONS
43 3.1 MODEL SPECIFICATIONS
43 3.2 LUBRICATION - COMPRESSOR
44 3.3 COMPRESSOR SPECIFICATIONS
45 3.4 APPLICATION GUIDE
45 3.5 ENGINE LUBRICATION GUIDE
46 3.6 ID, TANDEM AXLE
47 3.7 ID, TANDEM AXLE
48 3.8 ID, 4-WHEEL
50 3.9 ID, WITHOUT RUNNING GEAR
SECTION 4—OPERATION
53 4.1 GENERAL
53 4.2 PURPOSE OF CONTROLS
54 4.3 COMPRESSOR START-UP PROCEDURE
55 4.4 SHUTDOWN PROCEDURE
SECTION 5—MAINTENANCE
57 5.1 GENERAL
57 5.2 DAILY OPERATION
57 5.3 ENGINE COOLANT
58 5.4 MAINTENANCE AFTER INITIAL 50 HOURS OF OPERATION
58 5.5 MAINTENANCE EVERY 100 HOURS
58 5.6 MAINTENANCE EVERY 250 HOURS
58 5.7 MAINTENANCE EVERY 300 HOURS
58 5.8 MAINTENANCE EVERY 600 HOURS
59 5.9 MAINTENANCE EVERY 1000 HOURS
59 5.10 MAINTENANCE EVERY 1500 HOURS
59 5.11 PARTS REPLACEMENT AND ADJUSTMENT PROCEDURES
65 5.12 TROUBLESHOOTING GUIDE
SECTION 6—NOISE CONTROL
69 6.1 NOISE EMISSIONS WARRANTY
69 6.2 TAMPERING WITH THE NOISE CONTROL SYSTEM IS PROHIBITED
70 6.3 NOISE EMISSIONS MAINTENANCE & MAINTENANCE RECORD LOG
To Next Page
Loading...
