38
375 John Deere Standard and Aftercooled/Filtered Operator’s Manual and Parts List
SECTION 2
Press the Menu key to return to the Main Menu.5.
Press the Menu key to exit the Main Menu and return 6.
to the engine parameter display.
Selecting Units Of Measurement
Turn the switch to the ON position. Starting at the 1.
single or four engine parameter display, press the
Menu key.
The Main Menu will be displayed. Use the arrow keys 2.
to scroll through the menu until SELECTED UNITS is
highlighted.
Figure 2-51
Figure 2-52
Figure 2-53
Figure 2-54