44
375 John Deere Standard and Aftercooled/Filtered Operator’s Manual and Parts List
SECTION 2
Press the ENTER key again to toggle the 17.
AUTOMATIC SCAN function off.
Once the USE DEFAULTS, CUSTOM SETUP and 18.
AUTOMATIC SCAN functions have been set, press
the Menu key to return to the Main Menu.
Press the Menu key to exit the Main Menu and return 19.
to the engine parameter display.
Setup 4-Up Display
Turn the switch to the ON position. From the single or 1.
four engine parameter display, press the Menu key.
Figure 2-75
Figure 2-76
Figure 2-77
Figure 2-78
To Next Page
Loading...
