Sullair 300HH - Page 51

45
375 John Deere Standard and Aftercooled/Filtered Operator’s Manual and Parts List
DESCRIPTION
The Main Menu will be displayed. Use the arrow keys 2.
to scroll through the menu until SETUP 4-UP
DISPLAY is highlighted.
Once the SETUP 4-UP DISPLAY menu item has 3.
been highlighted, press the ENTER key to activate
the SETUP 4-UP DISPLAY menu.
Two options are available for the SETUP 4-UP 4.
DISPLAY.
Use Defaults – This option contains the following A.
engine parameters for display: Engine Speed,
Battery Voltage, Coolant Temperature, and Oil
Pressure.
Custom Setup – This option contains a list of B.
engine parameters. Engine parameters from this
list can be selected to replace any or all of the
default parameters.
To reset the display parameters to the factory 5.
defaults, scroll to and highlight USE DEFAULTS.
Press the ENTER key to activate the USE
DEFAULTS function. A message indicating the
display parameters are reset to the factory defaults
will be displayed, then the display will return to the
SETUP 4-UP DISPLAY menu.
GO
T
O 1-U
P
DISPL
A
Y
S
T
ORED CODES
ENGINE CONFIG
SETU
P
1-U
P
DISPL
A
Y
SELECTED UNITS
ADJUS
T
BACKLIGH
T
SETU
P
4-U
P
DISL
A
Y
MENU DISPL
A
Y
SU_0000556
GO
T
O 1-U
P
DISPL
A
Y
S
T
ORED CODES
ENGINE CONFIG
SETU
P
1-U
P
DISPL
A
Y
SELECTED UNITS
ADJUS
T
BACKLIGH
T
SETU
P
4-U
P
DISPL
A
Y
Press Enter Key
SU_0000557
USE DE
F
AU
L
TS
CUS
T
OM SETU
P
Select Factory Defaults
SU_0000558
Restored
T
o Defaults
RES
T
ORED
T
O
DE
F
AU
L
TS
SU_0000559
Figure 2-79
Figure 2-80
Figure 2-81
Figure 2-82