Sullair 375H - 3 Specifications; Specifications - 300 HH and 375 Caterpillar

25
375 Caterpillar Standard and Aftercooled/Filtered Operator’s Manual and Parts List
Section 3
SPECIFICATIONS
SPECIFICATIONS – 300HH AND 375 CATERPILLAR3.1
DIMENSIONS
Model Series Length (I) Width Height Weight (wet)
in mm in mm in mm lb kg
300HH, and 375
2-Wheel
156.2 3967.5 77.2 1960.9 74.0 1879.6 4420* 2004.9*
300HH, and 375
Less Running Gear
98.8 2509.5 59.3 1506.2 63.6 1615.4 4175* 1893.8*
(l) Length over drawbar for 2 – wheel version
*Add 115 lbs (52 kg) for Aftercooled Version
COMPRESSOR 300HH 375
Type Rotary Screw Rotary Screw
Maximum Operating Pressure 200 psig (13.8 bar) 125 psig (8.6 bar)
Pressure Delivery 300 Free CFM
(142 L/S)
375 Free CFM
(177 L/S)
Rated Pressure 200 psig (13.8 bar) 100 psig (6.9 bar)
Cooling Pressurized Compressor Fluid Pressurized Compressor Fluid
Lubricating Compressor Fluid See Table 1 See Table 1
Sump Capacity 7 US gallons
(26.5 liters)
7 US gallons
(26.5 liters)
Track Width 67.5"
(1714.5 mm)
67.5"
(1714.5 mm)
Tire Size (Load Range) H78 x 15ST (D) H78 x 15ST (D)
Tire Pressure 65 psig (4.4 bar) 65 psig (4.4 bar)
Wheel Size 15 x 6JJ 15 x 6JJ
Lug Nut Torque 60 ft-lbs (81 Nm) 60 ft-lbs (81 Nm)
Operating Tilt (maximum) 15° 15°
Electrical System 12 volt 12 volt
Compressor Discharge
Temperature
Shutdown 250°F (121°C) Shutdown 250°F (121°C)
Service Valves (2) ¾" (2) ¾"
Maximum Towing Speed 55 mph (88 kmph) 55 mph (88 kmph)
Axle Rating 5000 lbs
(2268 kg)
5000 lbs
(2268 kg)
Sound Level 76 dBA at 7 m 76 dBA at 7 m