95
375 John Deere Standard and Aftercooled/Filtered Operator’s Manual and Parts List
ILLUSTRATIONS AND PARTS LIST
7.6 CONTROL PARTS & DISCHARGE PARTS - 375 AND 425 (CONTINUED)
Key Description Part Number Note Quantity
44 nipple, pipe-xs plt 1 1/2 x 6 866424-060 1
45 bushing, red pltd 1 1/2 x 1 867106-040 1
46 elbow, pipe 45 deg 300# plt 1 1/2" 869430-060 1
47 conn, 90d str x jic 1 5/16 x 1 5/16 870616-016 1
A Shown 3/8" OD tubing blue
B To start run valve (end tee) 3/8 OD tubing red
C To unit oil return port 1/4" OD tubing white
D To start run valve (side) port 3/8" OD tubing orange
E To inlet valve 3/8" OD tubing yellow
G To inlet valve hose 5/16" OD white
H To unit (below inlet valve) 1/4" black
A1 START/RUN warm-up valve at instrument panel
A2 To pressure gauge
A3 To unit
A4 Line up “Z” and rotate CCW 90 degrees
(I) Replacement 0-ring part number 826502-232.
(II) See Section 7.10
(III) For color variations, see table in Section 7.20
(IV) See Section 7.8
To Next Page
Loading...
