97
375 John Deere Standard and Aftercooled/Filtered Operator’s Manual and Parts List
ILLUSTRATIONS AND PARTS LIST
7.6a CONTROL PARTS & DISCHARGE PARTS - 375 AND 425 CE (EUROPEAN)
MODELS (CONTINUED)
Key Description Part Number Note Quantity
1 insert, nylon tubing 1/4" od 02250052-841 4
2 tube, nyl .25 od x 040w wht (ft) 02250054-860 4
3 tube, nyl .25 od x .040w blk (ft) 02250054-861 3
4 adpt, 3/4mnpt x 3/4fbpt 02250058-667 3
5 tube, 5/16 od x .040 wall 02250081-220 3
6 plug, sight glass 1-7/8" sae 02250097-611 1
7 insert, nyl tubing 3/8" od 02250099-052 8
8 ange, kit sae splt 2.5" - viton 02250099-416 (I) 2
9 elbow, 90 3/8" tube x 1/4" npt m 02250099-626 1
10 connector, tube oil return 5/16 x 1/4 02250118-809 1
11 hose, air service std 375 02250119-080 1
12 manifold, service vlvs 375 02250119-644 1
13 valve, 1 1/2" npt min press chk 02250121-558 1
14 valve, ball 2-way 1/8" npt 90 deg 02250130-629 1
15 switch, temp n.c. 250°F, single pole 02250133-513 1
16 tubing, nylon 3/8" od red 02250139-950 3
17 tubing, nylon 3/8" od yellow 02250139-951 4
18 tubing, nylon 3/8" od blue 02250139-953 2
19 tubing, nylon 3/8" od orange 02250139-954 3
20 hose, discharge 375-600 dpq 02250166-548 1
21 support, reg/bd assy 375-600 t3 02250166-243 1
22 sub assembly, reg/bd assy 375 t3 02250166-244 (III) 1
23 tab, pnl frm frt 375-600 t3 02250169-050 (II) 1
24 tank, air/oil sep 300HH-600 ce 02250171-695 1
25 valve, relief 1” 250 psi 97/23/ce 0220176-054 1
26 plug, o-ring boss sae 1 1/4 040029 1
27 strainer, v-type 300 psi x 1/4 241771 1
28 tube, steel 5/16" od oil siphon 250009-253 1
29 connector, 1/4t x 1/4 npt str 250018-428 1
30 elbow, 90 1/4" tube x 1/8" npt 250018-429 1
31 element, oil sep 8.81 x 11.18 250034-087 1
32 washer, .625 hardened 250040-100 8
33 tee, m run 1/4t plsx 1/8 npt 250041-088 1
34 plug, str thd 3/4-16 sae vit 250042-623 1
35 union, hose coupling 3/4 s.e. 68016370 3
36 valve mf 3/4” 68527718 3
37 reducer, pipe 1-1/2 x 1-1/4 68528745 1
38 valve ball 1-1/4 68560535 1
To Next Page
Loading...
