Sullair 375H - Page 47

41
375 John Deere Standard and Aftercooled/Filtered Operator’s Manual and Parts List
DESCRIPTION
Three options are available for modication of Setup 4.
1-Up Display.
Use Defaults – This option contains the following A.
engine parameters for display: Engine Hours,
Engine Speed, Battery Voltage, % Load, Coolant
Temperature, and Oil Pressure.
Custom Setup – This option contains a list of B.
engine parameters. Engine parameters from this
list can be selected to replace any or all of the
default parameters. This option can be used to
add parameters available for scrolling in the
Setup 1-Up Display.
Automatic Scan – Selecting the scan function will C.
allow the Setup 1-Up Display to scroll through
the selected set of parameters one at a time,
momentarily pausing at each.
Use Defaults – To select USE DEFAULTS use the 5.
arrow keys to scroll to and highlight USE DEFAULTS
in the menu display.
Press the ENTER key to activate the USE 6.
DEFAULTS function.
The display parameters are reset to the factory 7.
defaults, then the display will return to the SETUP
1- UP DISPLAY menu.
1-Up Display Options
SU_0000541
USE DE
F
AU
L
TS
CUS
T
OM SETU
P
AU
T
OM
A
TIC SCAN OFF
Select Defaults
USE DE
F
AU
L
TS
CUS
T
OM SETU
P
AU
T
OM
A
TIC SCAN OFF
SU_0000542
Defaults Selected
USE DE
F
AU
L
TS
CUS
T
OM SETU
P
AU
T
OM
A
TIC SCAN OFF
SU_0000543
Restored
T
o Defaults
RES
T
ORED
T
O
DE
F
AU
L
TS
SU_0000544
Figure 2-63
Figure 2-64
Figure 2-65
Figure 2-66