111
375 John Deere Standard and Aftercooled/Filtered Operator’s Manual and Parts List
ILLUSTRATIONS AND PARTS LIST
7.9 REGULATOR/BLOWDOWN VALVE - 300HH, 375H, 375HH AND 425H
(CONTINUED)
Key Description Part Number Note Quantity
1 connector, 5/16" tube x 1/4" npt 02250081-219 1
2 tee, m run 3/8" tube x 1/4" npt 02250099-615 1
3 elbow, 90 3/8" tube x 1/4" npt m 02250099-626 1
4 transducer, pressure 0-100psi 5volt n4 02250140-194 1
5 connector, 3/8 tube x 1/4npt 02250148-188 2
6 manifold, press reg/bd 150psi 185h 02250151-201 (I) 1
7 valve, pressure regulator 250017-280 (II) 1
8 elbow, 1/4" tube x 1/4" npt 250018-430 1
9 tee, pipe 150# plt 1/4 866815-010 2
10 bushing, red pltd 1/4 x 1/8 867100-005 1
11 bushing, red pltd 1/2 x 1/4 867102-010 1
12 nipple, pipe-hx pltd 1/4 x 1/4 868504-025 3
(I) For maintenance on regulator blowdown manifold, order repair kit no. 02250147-737.
(II) For maintenance on pressure regulator valve, order repair kit no. 250019-453.
NOTE: Reference – sub-assembly number 02250166-245.
To Next Page
Loading...
