46
375 John Deere Standard and Aftercooled/Filtered Operator’s Manual and Parts List
SECTION 2
Custom Setup – To perform a custom setup of the 6.
SETUP 4-UP DISPLAY, use the arrow buttons to
scroll and highlight CUSTOM SETUP on the display.
The quadrant with the highlighted parameter value is 7.
the current selected parameter. Use the arrow keys
to highlight the value in the quadrant you wish to
change to a new parameter.
Press the ENTER key and a list of engine 8.
parameters will be displayed.
The parameter that is highlighted is the selected 9.
parameter for the screen. Use the arrow keys to
highlight the new parameter to be placed in the
SETUP 4-UP DISPLAY.
List Of Engine Parameters
Select Desired Engine Parameter
The number to the right of the
Figure 2-83
Figure 2-84
Figure 2-85
Figure 2-86
To Next Page
Loading...
