8.24 DECAL LOCATIONS, WATER-COOLED (CONTINUED)
Key Description Part Number Note Quantity
A1 Both Sides Of Machine
A2 Center Stripes Vertically Based On Location Of WS Controller Decal
A3 Locate Decals On Both Sides Of Machine By Using Location Of End Stripe And WS Controller Location
A4 Used On VSD Machines Only
A5 Used On Parallel Wye Machines Only
(I) Attached to the bottom on inside of starter box.
(II) Attached to inside of starter door.
(III) Attached to sub-panel inside starter box.
(IV) Attached to top of shipping strap.
(VIII) This part may vary per machine specification. Consult the Sullair factory for details.
PARTS LISTS
®SULLAIR®
3000-4500 Operator’s Manual and Parts List
131
To Next Page
Loading...
