Sullair 900XH - 1.3 Pressure Release Procedures; 1.4 Fire and Explosion Hazards

TABLE OF CONTENTS
Section 3
SPECIFICATIONS 25 3.1 SPECIFICATIONS
26 3.2 LUBRICATION GUIDE - COMPRESSOR
26 3.3 APPLICATION GUIDE
26 3.4 LUBRICATION GUIDE - ENGINE
Section 4
OPERATION 29 4.1 GENERAL
29 4.2 PURPOSE OF CONTROLS
30 4.3 INITIAL START-UP PROCEDURE
30 4.4 SUBSEQUENT START-UP PROCEDURE
31 4.5 SHUTDOWN PROCEDURE
Section 5
MAINTENANCE 33 5.1 GENERAL
33 5.2 DAILY OPERATION
33 5.3 MAINTENANCE AFTER INITIAL 50 HOURS
OF OPERATION
33 5.4 MAINTENANCE EVERY 100 HOURS
33 5.5 MAINTENANCE EVERY 250 HOURS
33 5.6 MAINTENANCE EVERY 300 HOURS
33 5.7 MAINTENANCE EVERY 500 HOURS
33 5.8 MAINTENANCE EVERY 1000 HOURS
34 5.9 PARTS REPLACEMENT AND ADJUSTMENT
PROCEDURES
34 COMPRESSOR FLUID CHANGE PROCEDURE
34 SERVICING THE MAIN FLUID FILTER
34 AIR FILTER MAINTENANCE
36 CONTROL SYSTEM ADJUSTMENT
37 SEPARATOR ELEMENT REPLACEMENT
37 5.10 TROUBLESHOOTING
38 5.11 TROUBLESHOOTING GUIDE
Section 6
NOISE CONTROL 41 6.1 NOISE EMISSIONS WARRANTY
41 6.2 TAMPERING WITH NOISE CONTROL SYSTEM
PROHIBITED
41 35 6.3 NOISE EMISSIONS MAINTENANCE AND
MAINTENANCE RECORD LOG
Continued...