SECTION 3 DE-18 USER MANUAL
29
Figure 3-1: Part 1 of 2 Typical Identification (See Figure 3-2 for Part 2)
KEY
NO.
PART NO.
Q
T
Y
DESCRIPTION
N
O
T
E
NOTES:
A1: EXHAUST
A2: RADIATOR FILL CAP LOCATION
A3: PACKAGE LIFTING EYES (4)
A4: ENCLOSED LIFTING LUGS
A5: SKID LIFTING LUGS (4X)
A6: 2” NPT FRAME DRAIN (6X)
A7: 11.25 X 5.25 FORK-LIFT POCKETS (2X)
A8: 15” WHEELS (4X)
A9: COMPRESSED AIR OUTLET: 4”-150# NPT FEMALE BALL VALVE.
COMPRESSOR AIR OUTLET BALL VALVE AND PIPE NIPPLE CAN BE
REMOVED TO REDUCE PACKAGE LENGTH FOR TRANSIT.
A10: 45° TURNING ANGLE
A11: COOLING AIR INLET
A12: SPARE DRAIN PORT (1” NPT)
A13: RADIATOR DRAIN PORT (1/2” NPT)
A14: ENGINE OIL DRAIN PORT (1” NPT)
A15: FUEL DRAIN PORT (1/2” NPT)
A16: AUX FUEL SUPPLY PORT (1” QUICK DISCONNECT)
A17: AUX FUEL RETURN PORT (3/4” QUICK DISCONNECT)
A18: COMPRESSOR OIL DRAIN (1” NPT)
A19: 1ST STAGE CONDENSATE DRAIN PORT (1” NPT)
A20: 2ND STAGE CONDENSATE DRAIN PORT (1” NPT)
A21: COMPRESSOR ENGINE AND AIR INTAKE
A22: FUEL FILL LOCATION INSIDE THIS PANEL ENCLOSURE MOUNTED
TO BACK OF THIS DOOR.
A23: CONTROL PANEL ACCESS DOOR
A24: COOLING AIR DISCHARGE
A25: ACCESS DOOR TO MURPHY CONTROLLER
A26: PARKING BRAKE LEVER (2X) PARKING BRAKE MUST BE
ENGAUGED AND WHEELS CHOCKED BEFORE OPERATION. MAX
17° INCLINE. WHEELS FOR YARD USE ONLY.
NOTES:
1- ALLOW A MINIMUM OF 6 FEET OF CLEARANCE AROUND THE PERIM-
ETER OF THE MACHINE TO FACILITATE FREE AIR CIRCULATION
AND ACCESS.
2- THE MACHINE MUST BE ON A SOLID AND LEVEL FOOTING BEFORE
OPERATING.
3- NO PIPING LOADS ARE ALLOWABLE AT EXTERNAL CONNECTIONS.
To Next Page
Loading...
