Section 3
13
DHL HEATLESS REGENERATIVE DRYER
INSTALLATION
3.1 TRANSPORT
Once verified the integrity of the packaging, place the
unit near to the installation point and unpack the
contents.
• To move the packaged unit we suggest to
use a suitable crane or forklift. We do not
recommend using hands.
• Handle with care. Improper handling could
cause irreparable damage.
• Even when packaged, keep the machine
protected from severity of the weather.
3.2 INSTALLATION SITE
Particular care is required in selecting the
installation site, as an improper location
could jeopardise the proper operation of
the dryer.
This unit is not suitable to be used in explosive
atmosphere, where risk of fire could exist, or in
presence of gaseous or solid polluting material.
Don’t use water to extinguish fire on the
dryer or in the surrounding area.
Machine level noise could be higher than
85 dBA. It is mandatory to install the
machine in dedicated area where people
are not normally present. The installator
and/or the user is responsible for correct installation
of the dryer, in order to prevent noise propagation to
the near work environment. The installator and/or the
user is also responsible for the safety signs affixing
into installation site.
Maintenance personnel must wear
hearing protection while operating the
dryer. Each employee must select proper
PPD (Personal Protection Device)
hearing protector (earmuffs, ear canal
caps and earplugs) in order to prevent discomfort or
damage to the operator’s hearing.
Minimal installation requirements:
• Select a clean room dry, free from dust,
and protected from atmospheric distur-
bances.
• The supporting area must be smooth, level
and able to hold the weight of the dryer.
• Minimum ambient temperature 34ºF, 1ºC.
• Maximum ambient temperature 120ºF, 5ºC.
• Allow at least a clearance of 3 feet (1
meter) on each side of the dryer to facilitate
possible maintenance operations.
• The dryer is required to be fixed to the sup-
porting surface.
The packaging materials
are recyclable. Each single
material must be properly
disposed in a manner
complying with the rules in
force in the destination
country.
To Next Page
Loading...
