Sullair ES-6 5H - Section 3 SPECIFICATIONS; ES-6 Model Specifications

Section 3
SPECIFICATIONS
9
3.1 SPECIFICATIONS -- ES--6
DIMENSIONS
ES--6 5H 5/4 18/.51 125/8.6 68/80 29.5 749 21.4 544 22.11 562 230 104
ES--6 5XH 5/4 13/.37 175/12 68/80 29.5 749 21.4 544 22.11 562 230 104
ES--6 7.5H 7.5/5.5 28/.79 125/8.6 69/82 31.5 800 21.4 544 22.11 562 270 122
ES--6 7.5XH 7.5/5.5 20/.57 175/12 69/82 31.5 800 21.4 544 22.11 562 270 122
ES--6 10H 10/7.5 38/1.08 125/8.6 70/85 31.5 800 21.4 544 22.11 562 280 127
ES--6 10XH 10/7.5 30/.85 175/12 70/85 31.5 800 21.4 544 22.11 562 280 127
Model
HP/KW
Capacity
ACFM/
Maximum
PSIG/BAR
Pressure
Length (II)
in. mm
Width (III)
Height (IV)
Weight (V)
lb. kg
60Hz
M
3
/MIN in. mm in. mm
ES--6 5L 5/4 21.2/.60 110/7.5 68/80 29.5 749 21.4 544 22.11 562 230 104
ES--6 5HH 5/4 17.3/.49 150/10 68/80 29.5 749 21.4 544 22.11 562 230 104
ES--6 5XH 5/4 13.4/.38 175/12 68/80 29.5 749 21.4 544 22.11 562 230 104
ES--6 7.5L 7.5/5.5 30/.85 110/7.5 69/82 31.5 800 21.4 544 22.11 562 270 122
ES--6 7.5HH 7.5/5.5 24.4/.69 150/10 69/82 31.5 800 21.4 544 22.11 562 270 122
ES--6 7.5XH 7.5/5.5 20.5/.58 175/12 69/82 31.5 800 21.4 544 22.11 562 270 122
ES--6 10L 10/7.5 39.2/1.11 110/7.5 70/85 31.5 800 21.4 544 22.11 562 280 127
ES--6 10HH 10/7.5 33.9/.96 150/10 70/85 31.5 800 21.4 544 22.11 562 280 127
ES--6 10XH 10/7.5 28.2/.80 175/12 70/85 31.5 800 21.4 544 22.11 562 280 127
Model
HP/KW
Capacity
ACFM/
Maximum
PSIG/BAR
Pressure
in. mm
lb. kg
50Hz
M
3
/MIN
dBA (I)
in. mm in. mm
with canopy/
without canopy
DIMENSIONS
(II) Enclosure option length is 51.5 in/ 1308 mm.
(III) Enclosure option width is 31 in/ 787 mm.
(IV) Enclosure option height is 25.5 in/ 648 mm.
(I) Ratings of dBA at one meter.
Length (II)
Width (III)
Height (IV)
Weight (V)
(V) For enclosure models, add 100 lbs/ 45.4 kg
to base weight of machine
dBA (I)
with canopy/
without canopy
COMPRESSOR
Type: Single Stage Fluid Injected Screw Compressor
Minimum Full Load Operating Pressure: 60 psi (4.1 bar)
Maximum Full Load Operating Pressure: Nameplate Pressure
(VI)
Bearing Type: Anti--friction
Cooling: Pressurized Fluid
Lubricant: See Lubricant Specification (Section 3.2)
Sump Capacity: 4.6 quarts (4.35 liters)
(VI)
Compressors are available for pressures up to 175 psi (12.1 bar).
MOTOR 60Hz 50Hz
Type: 5, 7.5, 10HP/ 5, 7.5, 10HP/
4, 5.5 & 7.5 KW 1.15 S.F. 4, 5.5 & 7.5 KW
Synchronous Speed: 1800 RPM 1500 RPM (5, 7.5HP/4, 5.5KW)
3000 RPM (10HP/7.5KW)
Voltage:
Standard All Sizes 230/460V 3 Phase 380/415 3 Phase
Optional All Sizes 200V 3 Phase 380/415 3 Phase
Optional All Sizes 575V 3 Phase 380/415 3 Phase
Optional 5HP Only 230V Single Phase 380/415 3 Phase
Type: Totally Enclosed Air Over Totally Enclosed Air Over
Insulation Class: “F” “F”
Maximum Ambient Temp.: 40
_
C (104
_
F) 40
_
C (104
_
F)
Shaft Diameter Fan: Nominal 5/8” Nominal 5/8”
Key Size Fan: Nominal 3/16” x 3/16” x 1 1/4” Nominal 3/16” x 3/16” x 1 1/4”
FLUID FILTER
(Internal Bypass Valve Set at 25 psig)
Type: Spin on, Sullair Proprietary
Micron: 23 Microns Abs.
FLUID SEPARATOR ELEMENT
Type: Push In Cartridge, Sullair Proprietary
Efficiency at Maximum Capacity: 3PPM Maximum